| GRINDING
WHEELS FOR RUBBER & URETHANE ROLLERS,
LATHE-CUT SEALS, BELTS AND ALL NON-METAL GRINDING
APPLICATIONS. FRICTION COATING consists of "razor
sharp" tungsten carbide cutting
structures that are placed into a unique cutting
pattern that is bonded to a steel wheel body. The
traits of our unique pattern design allows the
wheel to grind effortlessly through material cooler,
deeper and faster while providing a
smoother surface finish over similar carbide or
diamond coated wheels. Selecting the correct FRICTION
COATING wheel will help you reduce excessive heat,
smoke and fire problems while
increasing your over-all grinding productivity up
to 500%! All wheels are dynamically
balanced, pre-dressed and bores are
precision ground for 100% wheel accuracy.
STANDARD
WHEEL STYLES
Single grit - Grinding
and finishing in both Û directions.
Dual grit - Hogging
and finish grinding in one Þ direction.
Split grit - Hogging
and finish grinding in both Û directions.
Recommended
surface feet per minute: 7,000 to 22,000. Average:
SFM 14,000 to 22,000.
PROFILE AND
GROOVING WHEELS
Friction Coating's
Grooving Wheels can be designed for a variety of
applications. If you plan on putting a groove in
a rubber roll or are manufacturing a special
seal, Friction Coating's technical support team
can design a corresponding Grooving Wheel for
maximum productivity and tight tolerances.
Square corned or
radiused plunge wheels are available for plunge
forming grooves from .040" wide to your
dimension or shape. Ideal for feeder rolls or
manufacturing seals.
Square cut, Male
radius, Female Radius, Wedge groove and Custom
profiles: Some wheels are available from .040' to
2' wide and from 5' to 12' diameter. When
ordering please provide a print of your wheel and
profile dimensions and fax or mail it to us for
an accurate quote.
ABRASIVE
TABLE
SERIES
|
STYLE
|
PURPOSE
|
| 40 |
EXTRA FINE |
Light cutting & fine
finish grinding. 15 - 40 durometers |
| 50 |
MEDIUM FINE |
Medium cutting & finish
grinding. 30 - 70 durometers (General
all-purpose) |
| 60 |
MEDIUM |
Medium/heavy
cutting & finish grinding. 50 - 70
durometers (Belts/Lathe-cut seals) |
| 70 |
MEDIUM COARSE |
Moderate
hogging & finish grinding. 70 - 90
durometers (Use with dual & split
grit wheels) |
| 80 |
COARSE |
Hogging
& finish grinding 70 + durometers.
(Use with dual & split grit wheels) |
| 90 |
EXTRA COARSE |
Heavy
hogging deep passes all materials. (Use
with dual & split grit wheels) |
| |
|
|
*Typical
dual and split grit combinations: 70/40,
80/40, 90/50, 90/60, 90/70, 90/80.
**One would
typically select a grit combination to grind a
wide variety of materials.
SPECIAL
SERVICES
| Trouble shoot finish
problems |
Solve heat and smoke issues |
| Re-coat your present wheels |
Match textures to your
present coatings |
| Expedite shipments |
Technical customer support |
|
